Pipe support spacing table Australian standards The following calculations have taken out of the AS:24184.108.40.206.2,2005 Pipe support design for pipe support brackets distance. A pipe support system, the individual components of which are in accordance […]
TEST CERTIFICATE #: TC-F87.01 TEST SPECIMEN Specimen A: FRS DN150 split bracket, M16 threaded rod, and FRS nut, Specimen B: FRS side bracket
TEST CERTIFICATE #: TC-F86.01 TEST SPECIMEN A – FRS DN150 Strap Assembly, M16 threaded rod, drop in anchor. B – FRS DN150 Split Bracket research specimen, M16 threaded rod, side brackets bolted through steel angle, […]
Includes Information such as the properties of each chemical; the physical, health, and environmental health hazards; protective measures; and safety precautions for handling, storing, and transporting .
Complies with the following Australian Standards / codes of practice. AS: 2419.1:2017 Section 10 Pipe Supports. AS: 24220.127.116.11:2005 Pipe Supports AS: 2418.104.22.168:2017 Fire Rating. AS: 2422.214.171.124.4:2005 Fire Rating AS: 24126.96.36.199:2017 Spacing of supports ≥ 150mm […]
Mark holes using beam clip as template Drill holes with 13mm drill bit Insert bolts and fix to structure and tighten 100kpa Set laser or measure for level / measure and cut rod lengths […]
With a 18mm diameter drill bit, drill hole 60mm deep Clean out hole with steel brush until hole is clean and dust free Insert Anchor (HKD) with internal thread facing outwards Strike with setting […]