Fire Hydrant & Service Pipe Support Brackets

SIZES -> 100mm AND 150mm

TYPES -> PEAR BANDS : YOKE CLAMPS : 2 ROD CLAMPS

ABOUT

Fire Rated Solutions Pty Ltd

FRS director, Warren Rochester, is a licenced plumber who has been installing fire protection systems for 30 years. For a long time Warren and his team found there was always something wrong with the fire pipe brackets on the market.

In December 2020 Warren was consulted on equipment supply for a specific fire plumbing solution job. He quickly realised there was nothing available on the market that was 100% code compliant to fit this job.

Add this to the years of frustration installing fire system with non compliant equipment, Warren went into the workshop to make the perfect bracket.

In a whirl wind of changing Australian Certification Standards, Warren designed, patented and manufactured a bracket system for tradespeople by tradespeople. Not only would this equipment be code compliant but the FRS solution makes it easier and quicker for installation, identification and certification.

We are excited that we have put an outstanding product on the market and we will continue to deliver the highest of quality product for all involved from the consultants, builders, contractors, installers, certifiers and fire brigade personnel .

Warren Rochester
CEO
Fire Rated Solutions Pty Ltd

Australian Standards Fire Rated testing applied

Fire Hydrant & Service pipe Support Brackets

The Fire Rated Solutions Pty Ltd brackets are the first and only fire rated pipe support on the market that complies 100% to all the relevant codes and meets all fire requirements from the NCC and Australian Standards.

Our products have been tested compliant all the way from the connection to the building structure to the correct spacings.

Most noted sections:

AS: 2419.1: 2017 SECTION 10 PIPE SUPPORTS
AS: 2419.1.10.2 : Pipe support design
AS: 2419.1.10.4 : PROTECTION OF PIPE SUPPORTS
AS: 2419.1.10.1: Fire Rating
AS: 2419.1.10.5 : REQUIREMENTS OF PIPE SUPPORT COMPONENTS
AS: 2419.1.10.5.6 : Pear clips
AS:2419.1.10.5.7 : Two-Piece bolted clamps
AS:2419.1.10.6 : SPACING OF PIPE SUPPORTS
AS:2419.1.10.6 : Table 10.6
AS:2118.9.2.8 : VERIFICATION OF DESIGN
AS:2118.9.2.8.2 : 1995 : Verification test
AS:2118.9 : Table 2.8.1
AS:1530.4 : 2014 METHODS FOR FIRE TESTS ON BUILDING MATERIALS,COMPONENTS AND STRUCTURES
AS:1530.4.12 : CRITICAL SERVICES
AS:4600 : 2018 ( formally 1530.8 ) FOR THE THREADED ROD , DROP IN ANCHORS , NUTS AND BOLTS

Result of Inferior pipe brackets equipment

Problems with other pipe supports

an untestable engineering solution
the fixing method untested (either HKD or angle bracket)
ugly or unsightly covering method,
spacings were way off the standard all making it not be AS: code compliant
requiring additional works to get it as close as possible to standards
making it difficult to confidently certify.